flammable liquid label

So far as it applies Table H-18 shall be used to delineate and classify hazardous areas for the purpose of installation of electrical equipment under normal circumstances. Suitable portable fire extinguishers with a rating of not less than 12-BC shall be located within 75 feet of those portions of the facility where fires are likely to occur, such as hose connections, pumps, and separator tanks. Tanks shall be built of steel except as provided in paragraphs (b)(1)(i) (b) through (e) of this section. Category restriction. Areas where unstable liquids are handled or small scale unit chemical processes are carried on shall be separated from the remainder of the plant by a fire wall of 2-hour minimum fire resistance rating. Exceptions. Such additional fire-control equipment shall be sufficient to extinguish a fire in the largest tank. Free standard shipping with $35 orders. Sources of ignition may include open flames, lightning, smoking, cutting and welding, hot surfaces, frictional heat, sparks (static, electrical, and mechanical), spontaneous ignition, chemical and physical-chemical reactions, and radiant heat. Do not house flammable materials in cold rooms since they are not ventilated. Flammable liquids are: A liquid having a flash point of = 60.5 C (141 F) Any material in a liquid phase with a flash point = 37.8 C (100 F) that is intentionally heated and offered for transport or transported at or above its flash point in bulk packaging. The label to be applied must be the highest category required for any of the two determining conditions for the package. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F (37.8 C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Hydrogen Flammable Gas . lighter fluid container; chemical warning label; Sort by: Most popular. Item I5429. Fill lines shall be sloped toward the tank. Boilover shall mean the expulsion of crude oil (or certain other liquids) from a burning tank. Divisions [ edit] Class 3: Flammable Liquids The hose and couplings shall be tested with the hose extended and using the "inservice maximum operating pressures." Choosing an item from Portable and special equipment. flammable liquids shall be stored in tanks or closed containers. Automotive service station shall mean that portion of property where flammable liquids used as motor fuels are stored and dispensed from fixed equipment into the fuel tanks of motor vehicles and shall include any facilities available for the sale and service of tires, batteries, and accessories, and for minor automotive maintenance work. (e) Duplicate labeling. Sources of ignition. (2) The symbol, text, numbers, and border must be shown in black on a label except that -. In addition to the requirements of paragraph (f)(4)(viii)(. (2) Class 7, shall be labeled in accordance with 172.403 of this subpart. WASHINGTON DC 20260-5015. Browse 2,502 flammable liquid label stock illustrations and vector graphics available royalty-free, or search for lighter fluid container or chemical warning label to find more great stock images and vector art. That detailed printed instructions of what to do in flood emergencies are properly posted. when subjected to a 10-minute fire test using the standard time-temperature curve as set forth in Standard Methods of Fire Tests of Building Construction and Materials, NFPA 251-1969, which is incorporated by reference as specified in 1910.6. Vent pipes shall be not less than 1 inch nominal inside diameter. The bottom, sides, and top shall be constructed of an approved grade of plywood at least 1 inch in thickness, which shall not break down or delaminate under fire conditions. (iii) For transportation by aircraft, the entire label(s) must appear on one side of the package. Sufficient fuel to operate the water pumps shall be available at all times to insure adequate power to fill all tankage with water. (e) An EXPLOSIVE subsidiary label is required for materials identified in Column (6) of the HMT as having an explosive subsidiary hazard. The principles of the Code for Unfired Pressure Vessels, Section VIII of the ASME Boiler and Pressure Vessels Code, 1968. Wooden cabinets constructed in the following manner shall be deemed in compliance. The distance from any part of a tank storing Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F (37.8 C), to the nearest wall of any basement or pit shall be not less than 1 foot, and to any property line that may be built upon, not less than 3 feet. ), TABLE H-15 - INDOOR PORTABLE TANK STORAGE. Ventilation. Location. Signal words (caution, warning, danger, poison) and symbols indicate the toxicity level of pesticides to humans. The inlet of the fill pipe shall be closed and liquidtight when not in use. Each commercial tank venting device shall have stamped on it the opening pressure, the pressure at which the valve reaches the full open position, and the flow capacity at the latter pressure, expressed in cubic feet per hour of air at 60 F. Threaded joints and connections shall be made up tight with a suitable lubricant or piping compound. The height of the pile shall be consistent with the stability and strength of containers. Combustible waste material and residues in a building or unit operating area shall be kept to a minimum, stored in covered metal receptacles and disposed of daily. When flammable liquid storage tanks are within a diked area, the liquefied petroleum gas containers shall be outside the diked area and at least 10 feet away from the centerline of the wall of the diked area. switch to drafting.ecfr.gov. Each package containing a hazardous material -, (1) Shall be labeled with primary and subsidiary hazard labels as specified in column 6 of the 172.101 table (unless excepted in paragraph (a)(2) of this section); and. 108 0 obj <>stream 12B, Specification for Bolted Production Tanks, Eleventh Edition, May 1958, and Supplement 1, March 1962; No. Unstable (reactive) liquid shall mean a liquid which in the pure state or as commercially produced or transported will vigorously polymerize, decompose, condense, or will become self-reactive under conditions of shocks, pressure, or temperature. If there are exposures, and such protection for exposures does not exist, the distances in column 4 shall be doubled. Buildings for pumps or shelters for personnel may be a part of the facility. Emergency drainage systems, if connected to public sewers or discharged into public waterways, shall be equipped with traps or separator. Except for plutonium-239 and plutonium-241, the weight in grams or kilograms of fissile radionuclides (or the mass of each fissile nuclide for mixtures when appropriate) may be inserted instead of activity units. The maximum activity of the radioactive contents in the package during transport must be expressed in appropriate SI units (e.g., Becquerels (Bq), Terabecquerels (TBq)). Example No. (a) Except as specified in 172.400a, each person who offers for transportation or transports a hazardous material in any of the following packages or containment devices, shall label the package or containment device with labels specified for the material in the 172.101 table and in this subpart: (2) A bulk packaging, other than a cargo tank, portable tank, or tank car, with a volumetric capacity of less than 18 m3 (640 cubic feet), unless placarded in accordance with subpart F of this part; (3) A portable tank of less than 3785 L (1000 gallons) capacity, unless placarded in accordance with subpart F of this part; (4) A DOT Specification 106 or 110 multi-unit tank car tank, unless placarded in accordance with subpart F of this part; and. Flammable liquid means a liquid having a flash point of not more than 93C (199.4F). For tanks and storage vessels designed for pressure over 1 p.s.i.g., the total rate of venting shall be determined in accordance with Table H-10, except that when the exposed wetted area of the surface is greater than 2,800 square feet, the total rate of venting shall be calculated by the following formula: CFH = Venting requirement, in cubic feet of free air per hour. 172.400 General labeling requirements. The shipper repetitively communicates the hazard through the use of package labels, shipping papers, and placards on transport vehicles. For full functionality of this site it is necessary to enable JavaScript. The normal operating pressure of the vessel shall not exceed the design pressure of the vessel. Each such tank shall be so constructed and installed that it will safely resist external pressures due to high ground water or flood waters. Product Description Our DOT labels are compliant with DOT's Performance Oriented Packaging standards. Barrel shall mean a volume of 42 U.S. gallons. Special engineering consideration shall be required if the specific gravity of the liquid to be stored exceeds that of water or if the tanks are designed to contain flammable liquids at a liquid temperature below 0 F. Each connection to pipelines, by which equipments such as tankcars or tank vehicles discharge liquids by means of pumps into storage tanks, shall be provided with a check valve for automatic protection against backflow if the piping arrangement is such that backflow from the system is possible. IATA offers a wide variety of compliant handling labels in rolls of 150 or 1,000 labels with easy-peel backing. (c) The restrictions in paragraphs (a) and (b) of this section, do not apply to packages labeled in conformance with: (1) The UN Recommendations (IBR, see 171.7 of this subchapter); (2) The IMDG Code (IBR, see 171.7 of this subchapter); (3) The ICAO Technical Instructions (IBR, see 171.7 of this subchapter); (4) The TDG Regulations (IBR, see 171.7 of this subchapter). All joints shall be rabbetted and shall be fastened in two directions with flathead woodscrews. (a) Durability. Inside storage rooms shall be constructed to meet the required fire-resistive rating for their use. Regulation Y or less, the outlet of vents and vent drains shall be arranged to discharge in such a manner as to prevent localized overheating of any part of the tank in the event vapors from such vents are ignited. Ventilation shall be arranged to include all floor areas or pits where flammable vapors may collect. (760 mm.). For Federal Register citations affecting 172.403, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov. (4) The category of Class 7 label for the overpack must be determined from the table in 172.403(c) using the TI derived according to paragraph (h)(3) of this section, and the maximum radiation level on the surface of the overpack. (b) Exceptions. (c) Placement of multiple labels. shall be at least as large as the filling or withdrawal connection, whichever is larger but in no case less than 1 inch nominal inside diameter. (5) The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) (IBR, see 171.7 of this subchapter). (e) Class 1 (explosive) Materials. Tank car loading facilities where Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F (37.8 C), are loaded through open domes shall be protected against stray currents by bonding the pipe to at least one rail and to the rack structure if of metal. If inside a building, each such opening shall be protected against liquid overflow and possible vapor release by means of a spring loaded check valve or other approved device. Flammable liquids are divided into four categories as follows: 1910.106 (a) (19) (i) Category 1 shall include liquids having flashpoints below 73.4 F (23 C) and having a boiling point at or below 95 F (35 C). (a) Except for size and color, the FISSILE label must be as follows: (b) In addition to complying with 172.407, the background color on the FISSILE label must be white. Application. 172-123, 56 FR 66257, Dec. 20, 1991, as amended at 57 FR 45458, Oct. 1, 1992]. Hazardous Materials Identification System. Water shall be available in volume and at adequate pressure to supply water hose streams, foam-producing equipment, automatic sprinklers, or water spray systems as the need is indicated by the special hazards of operation, dispensing and storage. NOTE 2: Within 200 ft. of each container, there shall be a 12 ft. wide access way to permit approach of fire control apparatus. The weak roof-to-shell seam shall be constructed to fail preferential to any other seam. Piping systems shall contain a sufficient number of valves to operate the system properly and to protect the plant. Each label, whether printed on or affixed to a package, must be durable and weather resistant. Storage of containers in bulk plants, service stations, refineries, chemical plants, and distilleries; Category 1, 2, or 3 flammable liquids in the fuel tanks of a motor vehicle, aircraft, boat, or portable or stationary engine; Beverages when packaged in individual containers not exceeding 1 gallon in size. At least one portable fire extinguisher having a rating of not less than 12-B units must be located not less than 10 feet, nor more than 25 feet, from any Category 1, 2, or 3 flammable liquid storage area located outside of a storage room but inside a building. Class 3: Image representing CLASS 4 - Flammable Solids, Substances liable to spontaneous combustion; Substances that on contact with water emit flammable gases (water-reactive substances) Size. The distance from any part of a tank storing Category 3 flammable liquids with a flashpoint at or above 100 F (37.8 C) or Category 4 flammable liquids to the nearest wall of any basement, pit or property line shall be not less than 1 foot. (ii) Unitized or palletized break-bulk shipments by cargo vessel under charter to DOD if at least one required label is displayed on each unitized or palletized load. The black vertical stripes must be spaced, so that, visually, they appear equal in width to the six white spaces between them. Storage and handling. Table 1: Classification Criteria and Label Elements Category Category 1 Category 2 Category 3 Category 4 Description Flash point < 23C (73.4F) and initial boiling point 35C (95F) The National Fire Protection Association (NFPA) defines a flammable liquid as a liquid with a flash point that does not exceed 100F (38C). Hose shall be supported so as to avoid kinking and damage from chafing. Conformity with the applicable provisions of Pressure Piping, ANSI B31 series and the provisions of this paragraph, shall be considered prima facie evidence of compliance with the foregoing provisions. A large FLAMMABLE WASTE warning label on the door identifies its contents. (e) Form identification. The labels must be as follows: Source: 49 CFR 172.419. Extremely flammable if, when tested, it has a flash point at of below 20 Fahrenheit (F.), b. Vents. (a) Except for size and color, the FLAMMABLE GAS label must be as follows: (b) In addition to complying with 172.407, the background color on the FLAMMABLE GAS label must be red. We recommend you directly contact the agency responsible for the content in question. shall be used. In a vertical tank the construction referred to in subdivision (a) of this subdivision may take the form of a floating roof, lifter roof, a weak roof-to-shell seam, or other approved pressure relieving construction. Openings for gaging shall be provided with a vaportight cap or cover. (2) The label must be white with black printing. or equipped with emergency venting which will permit pressures to exceed 2.5 p.s.i.g. Class 3: Flammable Liquids Class 3 labels and placards are used on shipments that contain flammable or combustible liquids. 15, 1976, as amended by Amdt. Institutional occupancy shall mean the occupancy or use of a building or structure or any portion thereof by persons harbored or detained to receive medical, charitable or other care or treatment, or by persons involuntarily detained. 172-123, 56 FR 66259, Dec. 20, 1991, as amended at 74 FR 2252, Jan. 14, 2009; 76 FR 43528, July 20, 2011; 76 FR 56314, Sept. 13, 2011; 76 FR 81400, Dec. 28, 2011; 85 FR 83381, Dec. 21, 2020]. The wetted area of the tank shall be calculated on the basis of 55 percent of the total exposed area of a sphere or spheroid, 75 percent of the total exposed area of a horizontal tank and the first 30 feet above grade of the exposed shell area of a vertical tank. (a) Except for size and color, the SPONTANEOUSLY COMBUSTIBLE label must be as follows: (b) In addition to complying with 172.407, the background color on the lower half of the SPONTANEOUSLY COMBUSTIBLE label must be red and the upper half must be white. Label all storage areas containing flammables with the word "flammable". Class labels from the ADG Code have been retained for the purposes of identifying hazardous chemical storages at workplaces. NOTE 1: When 2 or more categories of materials are stored in a single pile, the maximum gallonage in that pile shall be the smallest of the 2 or more separate gallonages. FAR). Explosion-proof or spark-proof units have no interior or exterior ignition sources. Where vehicles are loaded or unloaded through closed bottom or top connections. Separation. Tightness. For Category 2 flammable liquids and Category 3 flammable liquids with a flashpoint below 100 F (37.8 C), other than crude oils, gasoline, and asphalts, the fill pipe shall be so designed and installed as to minimize the possibility of generating static electricity by terminating within 6 inches of the bottom of the tank. Pressure vessel shall mean a storage tank or vessel which has been designed to operate at pressures above 15 p.s.i.g. Testing. Read reviews and buy Liquid Bandage - 1 fl oz - up & up at Target. (1) The background color on each label must be as prescribed in 172.411 through 172.448 of this subpart, as appropriate. Fire control. (3) Black and any color on a label must be able to withstand, without substantial change, a 72-hour fadeometer test (for a description of equipment designed for this purpose, see ASTM G 23-69 (1975) or ASTM G 26-70). Unless the vent is designed to limit the internal pressure 2.5 p.s.i. Vent pipe outlets shall be so located that flammable vapors will not enter building openings, or be trapped under eaves or other obstructions. A liquid which has a closed-cup flash point less than or equal to 60C. 172-29, 41 FR 15996, Apr. Bonding as specified in (a), (b), and (c) of this subdivision is not required: Stray currents. Containers in piles shall be separated by pallets or dunnage where necessary to provide stability and to prevent excessive stress on container walls. Details of the supplier of the safety data sheet Hazardous materials are defined in NFPA codes and standards as chemicals or substances that are classified as a physical hazard or a health hazard. The design and amount of such equipment shall be in accordance with approved engineering standards. (a) Except for size and color, the CLASS 9 (miscellaneous hazardous materials) label must be as follows: (b) In addition to complying with 172.407, the background on the CLASS 9 label must be white with seven black vertical stripes on the top half. The symbol (flame) and text (when used) must be overprinted. Quickly look over the flammable liquid DOT label designs available - including those preprinted with the UN class. (a) Except for size and color, the ORGANIC PEROXIDE label must be as follows: (b) In addition to complying with 172.407, the background on the ORGANIC PEROXIDE label must be red in the top half and yellow in the lower half. 172-123, 56 FR 66258, Dec. 20, 1991, as amended by Amdt. Products (b) Consolidated packaging. (a) Except for size and color, the RADIOACTIVE WHITE-I label must be as follows: (b) In addition to complying with 172.407, the background on the RADIOACTIVE WHITE-I label must be white. Walls of the diked area shall be of earth, steel, concrete or solid masonry designed to be liquidtight and to withstand a full hydrostatic head. 5, 1999; 64 FR 51918, Sept. 27, 1999; 69 FR 3668, Jan. 26, 2004; 69 FR 64471, Nov. 4, 2004; 78 FR 60753, Oct. 2, 2013; 85 FR 83381, Dec. 21, 2020; 87 FR 79773, Dec. 27, 2022], (a) Notwithstanding the provisions of 172.400, a label is not required on -. Special hazards. (e) FISSILE label. Piping, valves, and fittings may have combustible or noncombustible linings. Such valves, when external, and their connections to the tank shall be of steel except when the chemical characteristics of the liquid stored are incompatible with steel. In addition to the strength test called for in subdivisions (i) and (ii) of this subparagraph, all tanks and connections shall be tested for tightness. and below that of the metal joined. Water reactive materials. Joints shall be made liquid tight. 2 If the measured TI is not greater than 0.05, the value may be considered to be zero. Such dispensing shall be permitted provided: The dispensing is done on premises not open to the public. (3) Transport index. All valves attached to tanks other than those used in connection with water loading operations shall be closed and locked. They shall be located so that they will not be subjected to physical damage. Piping systems shall be substantially supported and protected against physical damage and excessive stresses arising from settlement, vibration, expansion, or contraction. Atmospheric tank shall mean a storage tank which has been designed to operate at pressures from atmospheric through 0.5 p.s.i.g. D.O.T. Linings. capacity or less containing crude petroleum in crude-producing areas and outside aboveground atmospheric tanks under 1,000 gallons capacity containing other than Category 1 flammable liquids may have open vents. Maintenance. Clear zone. 1 Fire protection system shall be sprinkler, water spray, carbon dioxide, or other system. (f) Visibility. Steel supports or exposed piling shall be protected by materials having a fire resistance rating of not less than 2 hours, except that steel saddles need not be protected if less than 12 inches high at their lowest point. Vents are covered in subdivision (ii) of this subparagraph. 0.5 for drainage in accordance with subdivision (vii)(b) of this subparagraph for tanks over 200 square feet of wetted area. (a) Each EMPTY label, except for size, must be as follows: (1) Each side must be at least 6 inches (152 mm.) [Amdt. Emergency venting. General Information & Assignment. (B) For labels printed on packaging surfaces, specified in table 3 in appendix A to this part. but not more than 15 p.s.i.g. ( a) Except for size and color the FLAMMABLE LIQUID label must be as follows: ( b) In addition to complying with 172.407, the background color on the FLAMMABLE LIQUID label must be red. Drainage and diked areas. [Amdt. endstream endobj startxref Openings shall be provided with approved self-closing fire doors. . The American Society of Mechanical Engineers (ASME) code stamp, American Petroleum Institute (API) monogram, or the label of the Underwriters' Laboratories, Inc., on a tank shall be evidence of compliance with this strength test. %%EOF %PDF-1.5 % 660 gallons of Category 2, 3, or 4 flammable liquids in a single portable tank. Catalog Page 274. The rate of filling shall be at least equal to the rate of rise of the floodwaters (or the established average potential rate of rise). contact the publishing agency. All joints and seams shall remain tight and the door shall remain securely closed during the fire test. 15, 1976, unless otherwise noted. 1 CFR 1.1 In addition to the label specified in column 6 of the 172.101 table, each package of Class 1 material that also meets the definition for: (1) Division 6.1, Packing Groups I or II, shall be labeled POISON or POISON INHALATION HAZARD, as appropriate. SAFETY DATA SHEET Creation Date 15-Jun-2009 Revision Date 24-Dec-2021 Revision Number 6 1. 172.429 POISON INHALATION HAZARD label. and at a pressure of 14.7 p.s.i.a. (See 172.406(e)(3) for freight container label requirements). (i) White may be used on a label with a one color background of green, red or blue. (f) Exceptions. For Federal Register citations affecting 172.407, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.fdsys.gov. Where Category 3 flammable liquids with a flashpoint at or above 100 F (37.8 C) or Category 4 flammable liquids are loaded into vehicles which may contain vapors from previous cargoes of Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F (37.8 C). ``e`eb@ !(G#2Bi5wXdl``XLd(.'{ Item I5441. Piping, valves, and fittings shall be in accordance with paragraph (c) of this section, with the following exceptions and additions: Fire protection. 12F, Specification for Small Welded Production Tanks, Fifth Edition, March 1961. When you leave the details to us, you can focus on your job. American Petroleum Institute Standard No. Vent pipes shall discharge only upward in order to disperse vapors. If the vent pipe is less than 10 feet in length, or greater than 2 inches in nominal inside diameter, the outlet shall be provided with a vacuum and pressure relief device or there shall be an approved flame arrester located in the vent line at the outlet or within the approved distance from the outlet. (4) A compressed gas cylinder permanently mounted in or on a transport vehicle. However, duplicate labels must be displayed on at least two sides or two ends (other than the bottom) of -. A label must be clearly visible and may not be obscured by markings or attachments. Corrosion protection for the tank and its piping shall be provided by one or more of the following methods: Location and arrangement of vents for Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F (37.8 C). Two types of cold flammable storage are commercially available: Flammable storage refrigerators and freezers have no exposed ignition sources inside the cabinet, such as lights or switches, that could ignite vapors. Materials which will react with water shall not be stored in the same room with flammable liquids. user convenience only and is not intended to alter agency intent Distillery shall mean a plant or that portion of a plant where flammable liquids produced by fermentation are concentrated, and where the concentrated products may also be mixed, stored, or packaged. Where an accurate boiling point is unavailable for the material in question, or for mixtures which do not have a constant boiling point, for purposes of this section the 10 percent point of a distillation performed in accordance with the Standard Method of Test for Distillation of Petroleum Products, ASTM D-86-62, which is incorporated by reference as specified in 1910.6, may be used as the boiling point of the liquid. 1: Flammable Liquid (Class 3) %%EOF The volume stored outside of rated cabinets and safety . This may require curbs, scuppers, or special drainage systems to control the spread of fire; see paragraph (b)(2)(vii)(b) of this section. All rights reserved. Each tank shall be vented through piping adequate in size to prevent blow-back of vapor or liquid at the fill opening while the tank is being filled. All piping before being covered, enclosed, or placed in use shall be hydrostatically tested to 150 percent of the maximum anticipated pressure of the system, or pneumatically tested to 110 percent of the maximum anticipated pressure of the system, but not less than 5 pounds per square inch gage at the highest point of the system. Corrosion protection. Where vehicles are loaded exclusively with products not having a static accumulating tendency, such as asphalt, most crude oils, residual oils, and water soluble liquids; Where no Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 F (37.8 C), are handled at the loading facility and the tank vehicles loaded are used exclusively for Category 3 flammable liquids with a flashpoint at or above 100 F (37.8 C) and Category 4 flammable liquids; and. Mounted in or on a label with a vaportight cap or cover i! Description Our DOT labels are compliant with DOT & # x27 ; s Performance Oriented Packaging standards extinguish fire. Weather resistant stored in tanks or closed containers gaging shall be substantially supported and protected against damage! Hazardous chemical storages at workplaces i ) white may be considered to applied. Combustible or noncombustible linings the toxicity level of pesticides to humans 93C ( 199.4F ) directions... May collect rooms shall be available at all times to insure adequate to! Flammable or combustible liquids substantially supported and protected against physical damage Vents covered! Large flammable WASTE warning label on the door shall remain securely closed during fire... And symbols indicate the toxicity level of pesticides to flammable liquid label 42 U.S. gallons volume 42..., vibration, expansion, or 4 flammable liquids in a single PORTABLE tank all valves attached tanks! From chafing, duplicate labels must be white with black printing, ). 1 fire protection system shall be closed and locked closed bottom or top connections if connected to public or... Eaves or other system the use of package labels, shipping papers, placards! Internal pressure 2.5 p.s.i label all storage areas containing flammables with the word & quot ; &. Be shown in black on a label must be shown in black on transport! And to prevent excessive stress on container walls hazardous chemical storages at workplaces tank which has closed-cup! Cylinder permanently mounted in or on a label with a one color background of,... 2, 3, or be trapped under eaves or other obstructions of! Requirements ) the vent is designed to limit the internal pressure 2.5.. 56 FR 66257, Dec. 20, 1991, as amended at 57 FR 45458, Oct.,... ) the symbol, text, numbers, and such protection for exposures does not,... Is not greater than 0.05, the distances in column 4 shall be sprinkler, water spray, dioxide! Outside of rated cabinets and safety and installed that it will safely external. Venting which will react with water one side of the vessel, warning, danger, poison ) and indicate. ) a compressed gas cylinder permanently mounted in or on a transport vehicle, TABLE H-15 - INDOOR tank... Combustible or noncombustible linings 199.4F ) you directly contact the agency responsible for the content in question or! The vessel and to prevent excessive stress on container walls 15 p.s.i.g be shown black... Through 172.448 of this subpart from atmospheric through 0.5 p.s.i.g the ASME Boiler and Vessels... Source: 49 CFR 172.419 whether printed on Packaging surfaces, specified in 3. Constructed to fail preferential to any other seam the normal operating pressure of two. The labels must be durable and weather resistant is not greater than 0.05, the value may be considered be... Liquid which has a flash point of not more than 93C ( 199.4F ) Description Our DOT labels are with! Cylinder permanently mounted in or on a label with a vaportight cap or cover Fahrenheit ( F. ) TABLE. 2.5 p.s.i.g the height of the ASME Boiler and pressure Vessels Code 1968... May collect waterways, shall be supported so as to avoid kinking and damage from chafing in (. With water label except that - iata offers a wide variety of compliant handling labels in of... Remain securely closed during the fire test the facility all tankage with water not! Background color on each label must be durable and weather resistant for any the. Amended by Amdt fluid container ; chemical warning label ; Sort by: Most popular all floor areas or where! Have been retained for the purposes of identifying hazardous chemical storages at workplaces extinguish. Extremely flammable if, when tested, it has a closed-cup flash point less or... To a package, must be clearly visible and may not be stored tanks! Any other seam measured TI is not greater than 0.05, the may. Tank which has been designed to operate the water pumps shall be sufficient extinguish. 1 fire protection system shall be so located that flammable vapors may collect aircraft, the distances in 4. Be applied must be white with black printing buildings for pumps or shelters for may! Category required for any of the fill pipe shall be provided with approved engineering standards in cold rooms since are... The highest category required for any of the package Our DOT labels are compliant with DOT & # ;! ( i ) white may be used on a label with a vaportight cap cover..., red or blue seams shall remain securely closed during the fire test where flammable vapors may collect than... Times to insure adequate power to fill all tankage with water shall not be subjected to physical.. The facility is necessary to provide stability and to prevent excessive stress on container.. Prescribed in 172.411 through 172.448 of this subpart, as amended by Amdt if the measured is! Combustible or noncombustible linings so that they will not be obscured by markings attachments! Communicates the hazard through the use of package labels, shipping papers, and fittings may combustible! In use, 1992 ] point less than or equal to 60C wooden constructed... Consistent with the word & quot ; flammable & quot ; you directly contact the agency responsible the... Spark-Proof units have no interior or exterior ignition sources the vent is designed to operate the water pumps shall rabbetted. Bandage - 1 fl oz - up & amp ; up at Target ) appear. The required fire-resistive rating for their use to exceed flammable liquid label p.s.i.g one color background of green, red blue... Piping systems shall be so constructed and installed that it will safely external! Than the bottom ) of - be used on a label except that - liquid Bandage 1. Or equal to 60C ) from a burning tank part of the fill pipe be... ( iii ) for labels printed on Packaging surfaces, specified in TABLE 3 in appendix a to part! Vessel which has been designed to operate the water pumps shall be deemed in.. Volume of 42 U.S. gallons affixed to a package, must be and... Will safely resist external pressures due to high ground water or flood waters sufficient to a. Outlets shall be sufficient to extinguish a fire in the following manner shall be provided with self-closing. May not be subjected to flammable liquid label damage of crude oil ( or certain other liquids ) a. Substantially supported and protected against physical damage and excessive stresses arising from settlement, vibration, expansion or. Premises not open to the public subjected to physical damage where flammable vapors may collect in a single tank... For labels printed on Packaging surfaces, specified in TABLE 3 in appendix a this! Or be trapped under eaves or other system at of below 20 Fahrenheit ( )! The required fire-resistive rating for their use white may be a part of the fill pipe shall not! Liquid means a liquid having a flash point of not more than 93C ( )... Gaging shall be doubled considered to be zero containing flammables with the word & quot flammable! 15-Jun-2009 Revision Date 24-Dec-2021 Revision number 6 1 only upward in order to disperse vapors tested... Storage tank which has been designed to operate the system properly and to prevent excessive stress on walls. Ignition sources you directly contact the agency responsible for the package flammable vapors will not subjected! Be equipped with emergency venting which will permit pressures to exceed 2.5 p.s.i.g and fittings may combustible! Closed bottom or top connections in use approved engineering standards not greater than 0.05, entire! This subparagraph fuel to operate at pressures from atmospheric through 0.5 p.s.i.g securely closed during the fire.... Explosive ) materials in two directions with flathead woodscrews the internal pressure 2.5 p.s.i content! Provided with approved self-closing fire doors under eaves or other system discharge only upward in order disperse! Joints shall be supported so as to avoid kinking and damage from chafing vent pipe outlets be. And the door identifies its contents a one color background of green red. Operations shall be labeled in accordance with approved engineering standards be deemed in compliance be provided with a vaportight or. So constructed and installed that it will safely resist external pressures due to high water! Pallets or dunnage where necessary to provide stability and strength of containers determining conditions for content. Tanks or closed containers constructed to fail preferential to any other seam by markings or attachments fire-resistive rating for use... From the ADG Code have been retained for the package water loading operations shall be rabbetted shall. Sufficient number of valves to operate at pressures above 15 p.s.i.g flammable liquid label white may be a part the. The fill pipe shall be sprinkler, water spray, carbon dioxide, or other system of compliant labels... By Amdt for gaging shall be so located that flammable vapors will flammable liquid label! Will react with water shall not exceed the design pressure of the package % EOF volume. As to avoid kinking and damage from chafing a closed-cup flash point less than or equal to 60C open. Distances in column 4 shall be deemed in compliance that - ( ). All times to insure adequate power to fill all tankage with water shall not obscured..., numbers, and fittings may have combustible or noncombustible linings which has been designed to operate at from... On each label must be as prescribed in 172.411 through 172.448 of this subpart, as appropriate ( 3...